Table of Contents
Advertisement
1.7. Network Password Change
All EPoC products have the same network password on factory default to support plug & play between EPoC
products. In case of multiple 1:1 connections, It is possible to avoid network interference by setting password
of each group.
1. Basic connection
- Prepare a short coaxial cable for convenience.
- Connect EPoC products and power adapter.
2. Unjoin : removing the password
- Push the join button for 15 seconds. BNC Join LED turns off.
- Push the join button for 15 seconds on the other side.
3. Join : making new password
- After unjoining, push the join button for 1 or 2 seconds.
PWR LED turns off and on, and then BNC Join LED turns on.
- Push the join button for 3 seconds on the other side.
- After PWR LED is on, BNC Join LED on both side are flickering and the network is working again.
4. Repeat above 1~3 for the other groups.
h New and random password is automatically assigned and it can not be restored to the factory default
password.
Group A
Group B
Group C
NOTE:
- To avoid damage of products do not connect Transmitter RJ45 PoE Out to a PoE Switch!
- Joining function by hardware is only available between Transmitter/Receiver or
Transeiver devices except camera.
Transmitter
Transmitter
Transmitter
Quick Installation Guide — 6
AC/DC Adapter (56V)
Receiver
AC/DC Adapter (56V)
Receiver
AC/DC Adapter (56V)
Receiver
Advertisement
Table of Contents
