Table of Contents
Advertisement
3. Equipment Installation Guide
3.1. Selection of installation equipment
3.1.1. EPoC Solution Network Security
IP Video Surveillance
█
EPoC devices allow the coaxial cables from existing analogue CCTV system to be re-used for network
camera connection.
Reusing existing coax for IP cameras can cut installation costs and save installation time significantly.
EPoC devices will even provide 60W power over existing cable and outputs PoE to cameras, it would be
sufficient power for up to 4 cameras operation in DAISY CHAIN CONFIGURATION.
Analog Camera
AC / DC Adapter(12V)
PoE IP Camera
10/100 Ethernet
PoE
NOTE:
- To avoid damage of products do not connect Transmitter RJ45 PoE Out to a PoE Switch!
- Joining function by hardware is only available between Transmitter/Receiver or
Transeiver devices except camera.
Coaxial cable
Coaxial cable
Transmitter
Equipment Installation Guide — 16
D1 : 640 X 480
Receiver
AC/DC Adapter (56V)
DVR
NVR
Full HD : 1920 x 1080
Advertisement
Table of Contents
