3.5. Daisy Chain Connection
• The EPoC product supports a 1: N Daisy Chain configuration with 1: 2 or 1: 4 BNC Splitter (T-type BNC connectors)
and It is possible to connect multiple transmitters to one receiver over 1 line of the coax or UTP 4 pair or 2 wire.
• In a 1: N configuration, the transmission bandwidth between transmitter and receiver and the available PoE output
will be reduced in proportion to the number of products connected to the same group. Therefore, it is necessary to
check the transmission rate and power consumption of each network device which will be installed in advance.
3.5.1. Transmission rate of single port line up in daisy chain configuration
Daisy chain configuration
█
95Mbps
Tx
25Mbps
Tx
25Mbps
Tx
25Mbps
Tx
Rx
Rx
Equipment Installation Guide — 25
45Mbps
Tx
45Mbps
Tx
20Mbps
Tx
20Mbps
Tx
20Mbps
Tx
20Mbps
Tx
Rx
Rx