Joining (Network Grouping Password Setting) - Eneo IAM-6MC1001MTA User Manual

3.4. Joining (Network Grouping Password Setting)

EPoC devices support Joining (Network Grouping Password Setting) function. When cross-talking issue occurs
between devices, communication between products can be encrypted with joining function for reliable
communication without interference problem.
All EPoC devices have the same network password on factory default to support plug & play between EPoC devices.
In case of multiple 1:1 connections, It is possible to avoid network interference by setting password of each group. In
addition, the joining function enables secure network communication without threat of line-to-line signal hacking.
Joining function can be set up with Joining button on the product or can be set up using Joining software.
Join
█
• Joining can be physically set by Join button and the password is ramdomly generated. (To manage the joining
password, joining software should be used.)
• The default password of all EPoC devices is HomePlugAV for plug & play operation.
Components
█
• EPoC Rx / Tx products
• 56V or 57V VDC Power Adapter (GM60-550120-F recommended
• Coaxial cable (short cable)
• Paper clips (or everything else within 2mm diameter)
3.4.1. 1:1 Joining between EPoC products (password setting between products)
1:1 Joining
1. [Power on equipment]
Connect EPoC Rx and Tx with Coax (BNC) or UTP or 2-wire and power to the devices.
Check the Blue Power LED is lit.
Equipment Installation Guide — 20
█