Product Power Supply (Dc Adapter / Poe) - Eneo IAM-6MC1001MTA User Manual

3.6. Product power supply (DC adapter / PoE)

• EPoC device supports 12 ~ 57VDC input or PoE + (IEEE802.3af / at) input for product operation and PoE output.
(Power over Cable)
• EPoC Device supports PoC (Power over Cable) function, so that the transmitter and camera are powered by the
power from DC power supply connected to the receiver.
- Receiver requires PoE or 48VDC or more power input.
- If power is not sufficient for transmitter or PoE device operation, it is possible to apply the additional power to
transmitter so that the transmitter can supply power (PoE+) to the end device.
• When applying power adapter to the product line up which support PoE input, the PoE input function is stopped
and the adapter power input is operated.
• EPoC device supports up to 60W PoE output with 57VDC power supply and when configured with PoE device with
high power consumption, additional power can be applied to the transmitter for reliable configuration. (e.g. when
installing devices with daisy chain configuration or PTZ camera with high power consumption)
• Examples of using additional adapters
When installing 4 network cameras with high power consumption with 4:1 Daisy chain configuration, one additional
power supply (56VDC / 1.2A) can be applied on one of transmitters and max. 120W power is available for all sections.
Max.100m
PoE
Camera
Max.100m
Max.100m
Max.100m
NOTE:
- To avoid damage of products do not connect Transmitter RJ45 PoE Out to a PoE Switch!
- Joining function by hardware is only available between Transmitter/Receiver or
Transeiver devices except camera.
Cat.5e
Transmitter
Transmitter
Transmitter
Transmitter
NVR Network Switch
Equipment Installation Guide — 26
RG-6 Coaxial cable
Max. 200m
56V DC/1.2A
Power Supply
(Optional)
Max. 200m
Max. 200m
Max. 200m
56V DC/1.2A
Power Supply
BNC Splitter
Receiver
Cat.5e
Max.100m