Akai LCT2715 Operating Instructions Manual page 41

OSD FUNCTIONS----GEOMETRIC MENU
5 Using the Geometric Menu
Option
Contrast
Brightness
Back Light
Auto Setting
Phase
Manual Clock
Display
Adjustment
Note:
If your current input source is "VGA" , push "MENU" enter into this menu. It is not
available in other input source mode.
Contrast, Brightness can be adjusted only if picture mode is in USER mode. When
smart picture mode is pre-set, the value of the above settings will be different
according to different input source.
■ Using "Contrast"
Press MENU on the remote control, and then press
menu appears.
Press or
Press "ENTER" to confirm and display a status bar as below.
Press to decrease that will soften the color. Press
white area more bright.
Press "ENTER" to confirm the adjustment and return.
■ Using "Brightness"
40
Press /
0~100
0~100
Middle, Bright, Dark
0~31
0~255
Vertical position,
Horizontal position
to highlight the item.
Description
Reduce/Enhance
Darken/Brighten
Adjust the balance of back light
To adjust the position of
display automatically
Soften/Sharpen
Decrease/Increase
To adjust the position of
display
or until the "Geometric"
to increase that will make
(Continued on next page)