Table of Contents
Advertisement
RADIO OPERATIONS
aset
cpreset
f,g,
sclear
En
power
6standby/on
function
Manual tuning
1 Press function (BAND on the remote control)
repeatedly to select a band.
The unit switches to the radio from any other function
and alternates between FM and AM.
2 Push the dial left (f) or right (g) (press
f or g on the remote control) repeatedly
to tune in a station.
"TUNE" is displayed when a station is tuned in.
"1" lights up for FM stereo reception.
To search for a station automatically (Auto search)
Keep the dial pushed left (f) or right (g) (hold down
f or g on the remote control).
The unit searches for a station and stops at reception.
To stop the search manually, push the dial left (f) or right
(g) (press for g on the remote control).
•Auto search may not stop at stations with weak signals.
12
MONO
0-9,+10
cPLAY
Preset tuning
Preset up to 32 of your favorite stations and tune them in
directly.
Presetting stations
1 Tune in the desired station.
2 Press a to store the station.
The preset number, beginning from "1", appears on the
display.
3 Repeat steps 1 and 2 to preset other stations.
•You cannot store more than 32 preset stations.
"FULL" is displayed.
•If power is interrupted for more than approximately 12 hours,
all settings stored in memory after purchase need to be reset.
Tuning in preset stations
1 Select the band.
2 Push the dial up (c) (press c on the remote
SHIFT
control) repeatedly.
With each push (press), the station with the succeeding
BAND
preset number is tuned in.
You can tune in the desired preset station directly by
aPAUSE
pressing the numbered buttons on the remote control.
f,g
- To select preset number 10, press +10 and 0.
sSTOP
- To select preset number 15, press +10 and 5.
To clear a preset station
1 Tune in the station by preset tuning.
2 Push the dial down (s) (press s on the remote control),
then press a within 4 seconds.
Preset station numbers in the band which are higher than
the cleared number decrease by one.
Advertisement
Table of Contents
