Forms Of The Device - Burkert 8605 KK Operating Instructions Manual

5.3 Forms of the device
The Control Electronics is available in two forms.
5.3.1 Type 8605 KK (cable head version)
Plug-in version on valves with connector pattern A (e. g types 282, 28,
284, 285, 286, 6022, 602, 6024, 622).
The operating unit (see chapter 6.1.1 Operating Unit) can be removed after
the setting process.
During operation of the Control Electronics 8605 in cable head version
without operating unit, the operating status is indicated by two LEDs (see
chapter 6.1.2 LEDs on versions without operating unit).
device variants of Type 8605 kk
Two device variants are available:
• Variant 1 for valves with a max. current from 200 to 1000 mA,
• Variant 2 for valves with a max. current from 500 to 2000 mA.
5.3.2 Type 8605 hS (din rail version)
Separate electronics in housing for DIN rail mounting to DIN EN 50022.
This form is suitable for all proportional vales in the indicated power range.
The operating unit (see chapter 6.1.1 Operating Unit) cannot be removed.
device variants of Type 8605 hs
Three device variants are available:
• Variant 1 for valves with a max. current from 40 to 220 mA,
• Variant 2 for valves with a max. current from 200 to 1000 mA,
• Variant  for valves with a max. current from 500 to 2000 mA.
12 - 8605