Operating - Medisana TDB Manual

Backache therapy system
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 21
4.4
Selecting the
treatment time
1. The unit has been switched on by adjusting the intensity controllers,
and
, to one of the 8 intensity settings (see 4.2).
2. The display
shows the unit's basic setting.
3. Push the keypad cover
thumb on the area on the cover identified with raised dots. Press the
MODE key
repeatedly until the desired treatment program (P1 - P8)
is framed on the display.
NOTES
Each of these programs starts as soon as it is selected using
the MODE key
time has been set. The preset treatment time on first use is
15 minutes.
Turn the two intensity controllers,
to the OFF position to stop the program.
4. The most recently set treatment program is stored. The most recently
used program is set and flashes when the unit is switched on again.
1. The unit has been switched on and a treatment program has been se-
lected (see 4.2 and 4.3).
2. The display
shows the unit's basic setting with the program that has
been selected. When the unit is first switched on, the display flashes for
the preset treatment duration "15" or the most recently set treatment
time.
3. The unit offers 3 preset treatment times, 15 , 30 and 60 minutes, and
a setting for continuous operation (
4. Push the keypad cover
tedly until the desired treatment time (15 - 30 - 60 min. or
tinuous operation) flashes on the display. Push the keypad cover
back up.
NOTES
The treatment time always begins immediately as soon as
one of the three preset times has been selected or altered.
Turn the two intensity controllers,
to the OFF position to stop the program.
5. The appropriate display "15" , "30" or "60" flashes for the duration of
the treatment time set. The unit switches off automatically when the
treatment time has expired. The unit does not switch off independently
in continuous mode "
6. The most recently set treatment time is stored. The most recently selec-
ted treatment duration is set and flashes when the unit is switched back
on.
downwards. Do this by pressing with the
regardless of whether or not a treatment
and
©
).
downwards. Press the TIMER key
and
©
".

4 Operating

, anti-clockwise
repea-
©
for con-
, anti-clockwise
23
GB

Advertisement

Table of Contents
loading

This manual is also suitable for:

863524015588863523

Table of Contents