Getting Started - Medisana TDB Manual

channel 1 channel 2
3.3
Adjusting the belt
width
NOTES
Use only the original MEDISANA electrodes enclosed with
the unit. Use separate electrode pads for each user. These
may be ordered subsequently from MEDISANA as a pad
set.
For the first few applications, the electrode pads are very
sticky. It is, therefore, advisable to remove the electrode
pads carefully from the skin with the belt.
6. Turn the belt over and place it flat on the table again with the self-ad-
hesive pads facing downwards. The four pushbutton contacts are visible.
7. Take the cables and connect the two pushbutton connectors
pushbutton contacts as shown in the diagram. Do the same with push-
button connectors
CAUTION
Make sure that the two intensity controllers
in the OFF position before inserting the cables.
8. Insert the free ends of the cables into the connection sockets of channel
1 and 2 ( and ) on the top of the TENS unit. It is immaterial which
cable is assigned to which channel.
The belt is a universal size which fits everyone. The belt width may be
adjusted to suit the individual by shortening or lengthening the neoprene
straps to the right and left of the clip fastener
diagrams.

3 Getting Started

.
to the
and are
. Do this as shown in the
21
GB