Advertisement
Sheet top of fuselage with the 2x12 sheeting strips try to be as precise as possible it just looks nicer.
Turn over fuselage into build support, it will fit at the wing sections use some in between balsa , the
fuselage is stiff now
Place wing fasteners, parts , glue in M3 nut into former with epoxy, join formers , and place to F24 and
F42 bottom only place scrap fill to front formers to get flush with sheeting, note remember where you
placed them, or do all in a later stadium as we did .
Drill holes into former with a 2,5mm drill take out assembly and drill 4mm, place assembly.
Place wings and light drill with a 2mm drill at position , drill joiners with 3mm a few mm, so the M3
will hold the joiner, it is only that it does not slide out you might want to shorten the fasteners.
Place bottom fairing sheeting.
Advertisement
