SAFETY REQUIREMENTS
The installation of electrical equipment must be performed by experienced staff.
Before connecting the thermostat, make sure that the load (heater, pump,
etc.) is not connected to the supply and that the load is within the ratings
marked on the thermostat.
POSITIONING
Install the thermostat away from sources of heat (heaters, direct sunlight,
kitchens) and away from doors/windows.
Mount at about 1.5 m above the floor.
PREPARATION
Install the thermostat using the correct accessories (see the table in the
following page).
CLEANING
For cleaning - use only a damp cloth.
INSTALLATION
Thermostat
Frame A
Extender VI
Frame B
Extender BM
3