Related Manuals for finder BLISS WI-FI CHRONOTHERMOSTAT 1C.91
Summary of Contents for finder BLISS WI-FI CHRONOTHERMOSTAT 1C.91
- Page 1 CHRONOTHERMOSTAT 1C.91 ENGLISH IB1C91 - 06/19 - Finder S.p.A. con unico socio - 10040 ALMESE (TO) - ITALY...
- Page 2 Finder Bliss...
-
Page 3: Table Of Contents
INDEX TECHNICAL FEATURES Page 2 DIMENSIONS Page 2 INSTALLATION Page 2 POWER ON THE DISPLAY Page 6 CHRONOTHERMOSTAT OFF Page 6 DESCRIPTION OF KEYS AND SYMBOLS Page 7 DATE AND TIME SETTING Page 8 MANUAL PROGRAMMING Page 9 WEEKLY PROGRAMMING Page 10 COPY PROGRAM Page 11... -
Page 4: Technical Features
Operation mode: Summer Winter Auto Manual IP20 Degree of protection: PIN lock: yes, by Finder Bliss App 5 A 250 V AC volt-free changeover contact Output: Mounting: Wall DIMENSIONS INSTALLATION NOTES SAFETY REQUIREMENTS The installation and assembly of electrical equipment must be performed by expert personnel. - Page 5 POSITIONING Install the chronothermostat away from heat sources (radiators, direct sunlight, kitchens) and doors/windows. Mount about 1.5 meters above floor level. FIXING Use screws 0 3.5 mm MAX - maximum head thickness 3 mm. When fastening, do not over tighten the screws to avoid distorting the base. CLEANING Use only a damp cloth for cleaning.
- Page 6 Insert the batteries into the battery compartment, respecting the indicated polarities. CAUTION Incorrect battery polarity can cause the batteries to leak acid and damage the chronothermostat, invalidating the guarantee. – – – – Fix the chronothermostat on its base as shown in the figure below NOTE To disassemble it, proceed in reverse...
- Page 7 5 seconds After touching the Finder button and turning on the display, the battery icon will continue to flash. At the second threshold the Chronothermostat turns off, the output relay will be set to OFF and it will no longer be possible to make any further adjustments.
-
Page 8: Power On The Display
Touching the word “Finder” to turn on the chronothermostat, the words BATT and OFF will alternately appear If the chronothermostat is not connected to the Wi-Fi, after replacing the batteries reset the date and time. POWER ON THE DISPLAY CHRONOTHERMOSTAT OFF... -
Page 9: Description Of Keys And Symbols
DESCRIPTION OF KEYS AND SYMBOLS Switch on display/confirm Press for 2 seconds to save and exit Chronothermostat switching on/off Press for 4 seconds to access the settings Weekly programming Date/time programming (press 3 seconds) Manual function Back to previous step Slide to change values Output ON (WINTER setting) Output ON (SUMMER setting) -
Page 10: Date And Time Setting
DATE AND TIME SETTING 3” MONTH YEAR NOTE After setting the year, the chronothermostat automatically recognizes the day of the week and automatically a number from 1 to 7 will appear on the display to indicate the day of the week HOUR... -
Page 11: Manual Programming
NOTE At each programming step it is possible to go back one step using the back button Holding down the Finder button for 2 seconds saves and exits (returning to the main menu). MANUAL PROGRAMMING To exit the manual setting and return to the main screen, press the “hand”... -
Page 12: Weekly Programming
WEEKLY PROGRAMMING Press the numbers corresponding to the days of the week to be programmed (1 = Monday ... 7 = Sunday). At the end of the selection, press the Finder key. The screen indicates that the temperature will be programmed (right) at the time indicated on the left. -
Page 13: Copy Program
Proceed in the same way until reaching the 23:00 Hour time period. NOTE To go back to the previous step, use the back button or the Finder button to switch to the next time programming. To exit programming and save the values set so far, press the Finder button for 2 seconds. -
Page 14: Program Review
To go back to the previous step use the back button. Press the Finder button for 2 seconds to save and exit the review. OFF STATE & FROST PROTECTION FUNCTION When the chronothermostat is off, the display will show the word OFF. -
Page 15: Summer-Winter Setting
SUMMER-WINTER SETTING 3”... -
Page 16: Unlocking Chronothermostat - Pin
UNLOCKING CHRONOTHERMOSTAT - PIN The chronothermostat can only be locked using the Finder Bliss application. When the lock mode is activated, the Chronothermostat will display a lock icon. To unlock the chronothermostat you will need to enter the PIN as shown below... -
Page 17: Pairing With Phone
PAIRING WITH PHONE Download the Finder Bliss application to your smartphone. The pairing procedure will be described in the application. Turn on Wi-Fi and search for a network In the case where the APP credentials were not inserted by the expiry of the timeout, the Chronothermostat performs a RESET of the configuration and the internal Wi-Fi is turned off. -
Page 18: Chronothermostat Wi-Fi Connection To The Network
4 to 40 minutes, depending on the update time set on the application. To immediately connect the chronothermostat to the App, with display off, press the Finder button for 3 seconds. Segments will appear to indicate waiting for parameters to be synchronized with the APP. Update in progress 3”... -
Page 19: General Characteristics / Default Parameters Page
GENERAL CHARACTERISTICS Type Wi-Fi wall-mounted weekly programmable thermostat Wi-Fi frequency 2.4 GHz Encryption WPA2 / PSK Display Resolution 1 hour (1 minute via APP*) Daylight Automatic Update Saving Time About 1 year (Over 1 year depending on the mode set Battery life by APP) Functions... -
Page 20: Trouble Shooting
TROUBLE SHOOTING - Depending on the chronothermostat version, special characters such as “&” “!” “. ” “_” “/” may not be detected. In this case replace the router name (SSID) using letters and numbers. Same for the password. - The chronothermostat connects exclusively to 2.4 GHz networks. In the case of routers covering from 2.4 to 5 GH z it may in some cases be necessary to separate the two frequencies, then name an SSID for 2.4 GHz and one for 5 GHz.