Calibration - finder 1T Series Manual

CALIBRATION

The thermostat is supplied already calibrated by the factory.
If you want to change the measured temperature value as displayed on the
display, proceed as follows.
Starting from the main screen, press the (OFF) button for 4 seconds,
On the screen will appear and then
Use or to set the desired value and then press to confirm the
OK
change and exit the calibration.
If you do not touch any key; after a few seconds the product will come out of
the menu of its own accord - again displaying the main screen.
If you want to restore the factory settings, enter the advance menu and reset
the thermostat.
25