Cobra CobraMarine MRHH150FLTE Owner's Manual page 9

Getting Started
VHF Marine Radio Protocols VHF Marine Radio Protocols Operating Your Radio
Intro Operation Customer
Assistance
Backlight/Key Lock Button Backlight/Key Lock Button
The LCD will be illuminated by the backlight as long as any
button is pressed and will remain On for 10 seconds after the
button is released.
Customer
Installation
Assistance
To Display the Backlight Momentarily:
Secondary Icons
Press the Backlight/Key Lock button. The backlight will
remain On for 10 seconds. If the backlight is already On,
a press of the Backlight/Key Lock button will turn it Off.
Key Locked Buttons
FLOATING MARINE HH150
Key Lock
Notice Caution
ESC SETUP
To prevent accidental changes to your settings, you can lock
PWR MEM H-M-L ENTER
all of the buttons on the front of the the radio along with the
CHANNEL
SC/DW 16+
Squelch Defeat button.
VOL VOL +
To Lock or Unlock the Buttons:
SUBMERSIBLE
Press and hold the Backlight/Key Lock button for two
seconds. The Key Lock icon will appear or disappear in
Key Lock Icon
the LCD. When Key Lock is On, pressing any of the buttons
on the front of the radio will result in a three beep error
message.
Both the Backlight/Key Lock button and the Talk button are
FLOATING MARINE HH150
active — you can Receive (Rx) or Transmit (Tx) a message
with Key Lock On, but you cannot change the channel.
ESC SETUP
Channel Up/Down Buttons
WR H-M-L ENTER
MEM
Your radio will Receive (Rx) and Transmit (Tx) VHF signals on
Channel Up/Down Buttons
the channel indicated on the LCD display. You can change the
CHANNEL
channel at any time using the Channel Up/Down buttons.
16+
SC/DW
To Change Channels:
Press the Channel Up/Down buttons.
VOL +
VOL
If you are on Channel 88, pressing the Channel Up button
will advance to Channel 01. If you are on Channel 01,
SUBMERSIBLE
pressing the Channel Down button will advance to 4 digit
Currently On Channel 88
channel.
You can press and hold the Channel Up/Down button for
fast advance. The beep sound will occur only at the first
press of the buttons and not during fast advance.
If the new channel selected is restricted to low power, the
radio will automatically switch to Low Power mode and the
Low Power icon will appear on the LCD.
FLOATING MARINE HH150
If the radio is in the Key Lock mode, the channel will not
12 English change and the three beep error signal will sound.
ESC SETUP
Warranty
Warning
FLOATING MARINE HH150
Main Icons
VHF Marine Radio Protocols Operating Your Radio VHF Marine Radio Protocols
ESC
Intro
Scan Button
PWR
MEM
CHANNEL
SC/DW
Secondary Icons
VOL
Secondary Icons
SUBMERSIBLE
FLOATING MARINE HH150
HI/MED/LO Power Button
ESC
Main Icons
H-M-L
PWR MEM
CHANNEL
SC/DW
VOL
Secondary Icons
SUBMERSIBLE
Getting Started
SETUP
Operation Customer Warranty
Assistance
SCAN Button
H-M-L ENTER
Press and hold the SCN button to scan all channels.
The SCAN icon will display on the LCD display. Scanning
Intro Operation Customer Warranty
Assistance
begins at lower channels, and scans to higher channels.
Customer
16+
Installation
Assistance
Press Channel Up/Down button to change the scan direction.
When a signal is received in SCAN mode, the radio will pause
Customer
Installation
VOL +
Assistance
10 seconds before resuming SCAN operation.
The scan will stop when the Talk button is pressed.
NOTE
Notice Caution Warning
Memory channels need to be saved to effectively enter
Notice Caution Warning
the Memory Channel mode and scan all memory
channels. See page 25.
High/Medium/Low (HI/MED/LO) Power Button
SETUP
Your radio can transmit selectively at .5, 1 or 3 watts of power.
Cobra suggests you maintain the low power setting for
short-range communication. You will conserve battery life
ENTER
and avoid overpowering nearby stations by using a low
power signal. Use the High Power 3 watt setting for long-range
communications or when you do not receive a response
to a signal sent at .5 or 1 watt.
Intro Operation Customer Warranty
16+
Assistance
To Toggle Between Hi/Med/Lo Power Modes:
Press the H-M-L button. The LCD will show which mode
is in effect. Some channels are restricted for a maximum
Customer
Installation
VOL + use of 1 watt. Your radio will automatically set the power to
Assistance
Medium Power mode when you select those channels.
NOTE
Some channels, frequency bands and countries of use
might not be able to operate in High Power mode.
Notice Caution Warning
Nothing Comes Close to a Cobra
® 13