Overview
Feature
VGA port
SFP ports
Supported SFP+
Serial console port
System power
Power consumption
Fans
Storage
Package Contents
The following figure shows the package contents for the FMC 1600, 2600, and 4600. Note that the contents
are subject to change and your exact contents might contain additional or fewer items.
1600
One 3-row 15-pin DB-15 connector
Enabled by default
Two fixed SFP+ ports
SFP-10G-SR (10 Gb)
SFP-10G-LR (10 Gb)
Note
Only these two SFPs have been qualified for use on the FMC. Although
non-Cisco SFPs and other Cisco SFPs are allowed, we do not
recommend using them because they have not been tested and validated
by Cisco. Cisco TAC may refuse support for any interoperability
problems that result from using an untested SFP transceiver.
RJ-45 serial port running RS-232 (RS-232D TIA-561)
Two 770-W AC power supplies
Hot-swappable and redundant as 1+1
2626 BTU/hr
Six fans for front-to-rear cooling
Internal component only; not field-replaceable
Two 1.2-TB 10-K SAS
HDDs
RAID 1, hot-swappable
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
2600
4600
Four 600-GB 10-K SAS
Ten 1.2-TB SAS HDDs
HDDs
RAID 6, hot-swappable
RAID 5, hot-swappable
Package Contents
3