Cisco FMC 1600 Hardware Installation Manual page 38

Rack-Mount the Chassis
Figure 32: Inner Rail Release Clip
1 Inner rail release clip
3 Button to unlock rail
Press this button to unlock the rail so you can pull out
the chassis from the rack when uninstalling or
performing maintenance.
Step 5
(Optional) Secure the chassis in the rack more permanently by using the two screws that are provided with the slide rails.
Perform this step if you plan to move the rack with chassis installed. With the chassis fully pushed into the slide rails,
open a hinged slam latch lever on the front of the chassis and insert the screw through the hole that is under the lever.
The screw threads into the static part of the rail on the rack post and prevents the chassis from being pulled out. Repeat
for the opposite slam latch.
What to do next
Continue with the Connect Cables, Turn on Power, and Verify Status topics in the
Center Getting Started Guide for Models 1600, 2600, and
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
34
2 Inner rail attached to the chassis and inserted into outer
rail
4 Outer rail attached to rack post
4600.
Rack-Mount the Chassis
Cisco Firepower Management