XCMG XDN450 Operation Manual page 83

!
the front tilt is calculated by using the corrective angle. This correction is calculated by
comparing the proportion of the upper and lower corners of the correction calculated by the
displacement sensor.
Enter the "rear gear warranty" area：
!
1) The operating hours of various devices can be seen at the top of the screen. You can
understand the relationship between how long each device is operating and the
consumption of parts, and it is used as the basis for replacing the consumables in
advance.
2) Reducer warranty, according to the input on the screen after the warranty item, press
[record];
3) The table below is the history warranty record.
For the maintenance of the reducer motor, please refer to the
manual of the reducer.
62