Major Dangers - XCMG XDN450 Operation Manual

!
1.3.5 After start, please do not conduct any adjustment to the machine.
1.3.6 Stay away from the rotating and working machine.
1.3.7 As a pollutant, waste oil is not allowed to be
dumped into the sewer and river or splashed upon the floor.
It should be poured into certain containers or disposed
according to the relevant laws and regulations.
1.3.8 The burning hot oil and components may cause
personal injuries.
1.3.9 Before welding, the main power switch on the
machine must be turned off, otherwise, the stray current and voltage produced during the
welding process will damage the electrical elements.

1.4 Major dangers

1.4.1 When abnormal condition or personal injuries occurred, scram button should be
pressed to shut down the equipment.
1.4.2 When the equipment is working,the main oil cylinder pushes the head to move
forward, keep away from the motion to avoid personal injuries.
1.4.3 During the transportation of the machine, Rotation- prevent pin must be assembled and
the truck-mounted crane is forbidden to use.
1.4.4 If the machine is assembled with cutter disc revolving device,keep away from the
machine to avoid being cut by the cutter.
Product information ! 22