!
The operation record of the upper stage project will be
automatically transferred to the connected USB storage device. When "
!
" is
entered, the operation record of the upper stage project will be automatically cleared.
3.5.2.1 Please enter the project name
Used to fill in the project name
.3.5.2.2 Please enter the project number
Used to fill in the project number.
3.5.2.3 Solenoid valve detection
Enter the "solenoid valve detection" screen:
!
Instructions:
"Solenoid valve rated current" is set to 0.5. Press
, the system will automatically
!
detect the current of each solenoid valve. If the current is lower than the rated current, it will be
displayed!
, indicating that the solenoid valve is faulty; if it is higher than the rated current,
34