XCMG XDN450 Operation Manual page 82

!
!
Correction method:：
1）The nose is corrected downwards, and the front and rear tilt angles A and B are
measured by an electronic level rule, expressed in terms of thousandths.
2) After inputting A minus B data, press OK to complete the setting (note the positive and
negative);
3) If level ruler does not have a 1000-degree function, only the angle, use the calculator tan
(angle) × 1000 is a thousandth.
Principle explanation: The inclinometer in the target box is to monitor the back tilt angle, and
!
61