How To Use The Timer By Setting Any Time (Multi-Timer) - Seiko Time Keeper ViB+ Instructions Manual

■HOW TO USE THE TIMER BY SETTING ANY TIME (MULTI-TIMER)

• The timer can be set to any value. (Time can be set from 10 sec. to 99 min. 59 sec.)
• The multi-timer can be set for any desired time periods, as shown below.
Can be set up to 10 timers.
Timer 1 Timer 2
• The number of repeat cycles of the set timers can be specified.
(1 - 99 times, infinite number of repeats)
Timer 1
Example: Suppose you want to set 3 timers.
Timer 1
The time cycles will be repeated for the set repeat number in the order of the times set on the 3 timers.
* Users can select 1 - 99 times or an infinite number of times as the repeat number
(repeat frequency) for the maximum of 10 times as one set.
• COUNT-DOWN DISPLAY ⇔ COUNT-UP DISPLAY can be selected.
• This function indicates that the time is up by releasing a beep sound or vibration
alarm.
• Users can continue to count the time even after the time set on the timer is over
(Overtime Display).
34
●How to Check, Add or Alter the Time on the Timer
〈Suppose the user wants to set the timer 1 to 2 min. 30 sec. and timer 2 to 30 sec.〉
¤Align the knob of the rotary switch with
‹Press button ¬
and align with the location that needs checked, add or alter the time that has been set on
the timer.
›Press button ¿ ¡
or button to be able to add or alter the time that has been set.
The timers that have already been set cannot be canceled. Be sure to refer to How to Reset the Desired
*
Time that has been set on the Timer.
〈How to Reset the Desired Time You Have Set on the Timer (Erases all settings)〉
¤Align the knob of the rotary switch with
‹Keep button ¿ ¡
and button depressed simultaneously for 2 or 3 seconds to be able to reset.
¡
36
Timer 8 Timer 9 Timer 10
Timer 2 Timer 3
Timer 2 Timer 3
.
.
¿
●How to Set Any Time on the Timer
¤Align the knob of the rotary switch with
‹Press button ¿
once and set in steps of 1 sec. at a time. When keeping button
the seconds advance rapidly and stop when the button is released. Similarly setting the minutes by pressing
button ¡ can be achived. Each time the button is pressed the time is set in 1 min. increments. Keeping this
button depressed advances the minutes rapidly, and the minute setting will stop when the button is released.
* Note that when the time set is under 10 sec. the setting will automatically become 10 sec.
* Users can set the minutes from 1 min. up to 99 min.
* When setting the timer to any desired time, the time can be set ranging from 10 sec. up to 99 min. 59 sec.
›Each time the button is pressed ¬
the time advances step by step to allow setting the timer to the needed
‹
time. Set the time by repeating procedures
To set the timer to any desired you can also set up to 10 timers at a time.
*
〈Suppose the user wants to set the timer 1 to 2 min. 30 sec. and timer 2 to 30 sec.〉
●How to Set the Repeat Number of the Timer Set to Any Desired Time
¤Align the knob of the rotary switch with
‹When button ¡
is pressed a single time the repeat number will be 1. Keep the button depressed to
advance the repeat time rapidly. The repeat number will stop when you release the button.
The user can set the repeat number from 1 - 99 times.
*
›When setting the repeat number to the infinite number of times setting, press button
with .
One can set the repeat time to the infinite number of times setting after "99 times."
*
(Set to any number of times)
¡
Note that when button ¿ is pressed in this condition, the setting of the TIME-UP warning function can
*
be altered.
.
¿
depressed for 2 or 3 seconds
and ›.
¿ ¡
¿
.
(Set to 3 times)
¡
¬
35
¡
and align
37