Auxiliary Equipment; Other Functions - Aiwa CDC-X917M Operating Instructions Manual

Labeled-side up
CD indicator
Track number
To
Eject a CD
Skip to the next track
Go back to the beginning
of the current track
Each extra press skips
backward one extra track
Locate a specific point in
a track
* When you remove the CD, the front panel will close
automatically after a while.
To close the front panel manually, press z while the
front panel is open.
Note
• When you play a CD that is already inserted, CD play
starts at the point where it stopped the previous time.
A newly inserted CD starts from the first track.
• A CD-R or CD-RW may take some time to start playing
back, but this is not a malfunction.
• If a CD-R or CD-RW with no data or incompatible data
is inserted, "ERROR03" will appear in the display. The
unit cannot play such discs.
Intro Play
You can locate a desired track by monitoring the first 10
seconds of all the tracks on a CD.
1
Press INT during CD play.
"SCAN" appears in the display.
2
Press INT again when the desired track is played.
The unit returns to normal CD play.
One track Repeat Play
You can play a track repeatedly.
1
Press REP1 during CD play.
"REPEAT1" appears in the display.
To cancel One track Repeat Play, press REP1 again.
Random Play
You can play all the tracks in random order.
1
Press RNDM during CD play.
"RANDOM" appears in the display.
To cancel Random Play, press RNDM again.
5 5
ENGLISH ENGLISH
Elapsed playing time
Press
z*
t
r
Press and hold r or
t until you find the
point.
Note
During Random Play, pressing r allows you to skip
only to the beginning of the current track, not to the
previous track.

AUXILIARY EQUIPMENT

Listening to a cassette/MD/MP3 portable
player or other equipment
You can listen to equipment connected to the unit. Refer
to the operating instructions for the corresponding
equipment for more detailed information.
Be sure to remove inserted CDs to prevent possible
damage to the unit before connecting the equipment.
1
Connect a cassette/MD/MP3 portable player or other
equipment via the unit's AUX IN jack (3.5 mm dia.).
2
Press FUNCTION
appears in the display.
Note
When a connecting cord is plugged into the AUX IN jack,
you cannot insert or eject a CD even if you press z. Be
sure to disconnect the cord before inserting or ejecting
the CD. Likewise, be sure to disconnect it before you
turn off the ignition switch, otherwise the front panel
won't be retracted.

OTHER FUNCTIONS

Changing the display contrast
1
Press and hold FUNCTION
in the display.
2
Press + or – to adjust the contrast.
repeatedly until "AUX IN"
until "CONT.", appears