Cd Changer Play - Aiwa CDC-X146 Operating Instructions Manual

CD CHANGER PLAY
You can play discs with this unit by connecting
the optional AIWA ADC-EX1 06, ADC-M60 CD
changer. Make sure that the disc magazine
loaded with the discs is inserted in the connected
CD changer.
To install the unit, refertothe separate Installation
and Connections manual.
2
1
2
1
Press CD CH to start playing from disc 1.
The disc and track numbers appear.
CD changer operation indicator
I
~ac
MJMber
Track nukber
Adjust the volume with +/-.
PWFVMUTE INT REP CD DlSC7/
A
CD CH i++ M REP1 RANDOM BAND
Press following buttons to operate the connected
CD changer.
To do this
I Press this button
To switch modes
To turn the unit off, press and hold PWR/MUTE
for more than 2 seconds.
Even if the unit is in Radio or CD Play mode,
pressing CD CH switches the unit to CD Changer
Play mode.
If you wish to switch to another mode, press the
following buttons.
- Pressing CD switches the unit to CD Play
mode.
– Pressing BAND switches the unit to Radio
mode.
To stdptracks
Buttons
Press* Press and hold
m Skips to the next Advances
track
rapidly
Release it to
resume play
w Skips back to Reverses
the beginning of rapidly
the current track Release it to
resume play
*Press for less than 0.5 second.
To play other disc
To start playing the previous disc in the disc
magazine, press DISC T.
To start playing the next disc, press
DISC A.
The number of the disc appears.
Repeat play
To repeat the current track, press REP1 (the
"REPEAT 1" indication appears).
To repeat the current disc, press REP (the
"REPEAT indication appears).
To cancel either mode, press the same button
again.
Intro play
Press INT (the "SCAN indication appears).
The first 10 seconds of each track on all the
discs
in the disc magazine are played in sequence.
To cancel intro play, press INT again.
13
ENGLISH