Aiwa CDC-X146 Operating Instructions Manual page 10

MY INFORMATION SWITCH
You can activate the timer for program 1 and/or
program 2.
CD
2,4
1
2
3
4
5
+of
0
With the unit on, press MY INFO.
The "PRG1 ON or "PRG1 OFF indication
(the current setting for program 1) appears.
Press TUNE Y or TUNE
A
repeatedly
until the "PRG1 ON" indication flashes.
Press MY INFO.
The "PRG2 ON or "PRG2 OFF indication
(the current setting for program 2) appears.
Press TUNE Y or TUNE
A
repeatedly
until the "PRG2 ON" indication flashes.
Press MY INFO to activate the timer.
The "MY INFO indicator lights up.
If you do not proceed to the next step within 5
seconds in steps 1 – 4, the display returns to the
current source indication.
To cancel the timer
To cancel program 1, press TUNE Y or TUNE A
repeatedly until the "PRGI OFF indication flashes
in step 2.
To cancel program 2, press TUNE 7 or TUNE A
repeatedly until the "PRG20FF indication flashes
in step 4.
Notes
When you preset two programs, be sure that
they do not overlap.
Even if the unit is in a mode other than Radio
mode, the unit switches to Radio mode and
tunes in the preset radio program at the preset
time automatically. When the program is over,
the unit returns totheformermode automatically.
When this function is activated, TUNE Y/A,
A. ME, LO and the preset number buttons do not
work for tuning in stations.
Even if you are listening to a radio program with
this function, pressing the following buttons
switches the unit to other mode:
— Pressing BAND changes the unit to Radio
mode.
— Pressing CD changes the unit to CD Play
mode.
— Pressing CD CH changes the unit to CD
Changer Play mode.
If you switch modes with these buttons, the unit
does not turn off at the turn-off time of the timer.
To switch to TAPE/MD IN mode, press CD, CD
CH, or BAND before connecting a portable
cassette/MD player, etc. to the TAPE/MD IN
jack.
9
ENGLISH