Soundadjustments - Aiwa CDC-X146 Operating Instructions Manual

SOUNDADJUSTMENTS
PWRIMUTE
21
1
2
Press SEL to select the mode that you
wish to adjust from: VOL (volume),
BASS (bass), TRE (treble), BAL
(balance) and FAD (fader).
The following indications are displayed in
cyclic order.
If you do not proceed with step 2 within 5
seconds, the selected mode is canceled, and
the indication returns to the current source
mode.
Press +/- to adjust the level.
Press and hold either button to change the
level rapidly.
Decreases the
T ~ ~ treble level
Increases the
treble level
You can adjust the position of sound stage and
tone balance to best serve a particular seat just
by pressing DRV,
DRV
Press DRV to change the position of sound
stage,
Each time you press DRV, the sound stage
changes as follows.
K
OFF
J
-L
For the front left seat
J'
=R
For the front right seat
Note
When DRV is activated, you cannot adjust BAL
(balance), FAD (fader), BASS (bass) and TRE
(treble) modes.
Without selecting any mode with SEL, only
the volume level can be adjusted by pressing
+/–.
PWR/?vlUTE button
Press this button to temporarily Iowerthevolume.
Press it again to restore the previous volume.
ENGLISH 1 0