Table of Contents
Advertisement
TROUBLESHOOTING
In the following cases, the corresponding error code indicator appears.
Internal CD player:
Error code
ERROR03
cause
~
The disc cannot be read properly.
The disc may be damagedor dirty. Insert
CD Change~
Error code
Cause
Solution
ERROR01
The disc magazineis not properly
Ineerfed in
Re-insert the magszine. Refer to the
the compect disc changer.
instruction manual of the compact disc
changer.
ERROR 02
No discs are loaded into the diet magazine.
Ineert diets properly. Refer to the instruction
manual of the compact disc changer.
ERROR 03
Focus error.
Check that the dfece are loaded properly into
the disc magazine (right side up, etc.)
ERROR 04
Problem with the compaot disc changer.
Reset the unit by pressing the reset button. If
this does not correct the problem, consult an
AIWA service center.
ERROR 05
The compact disc changer is overheated.
Allow the changer to cool off by moving the
vehicle out of direct eunlight.
Reset button
The reset button is visible when you detach the
front panel. Try pressing this button if a CD does
not operate properly. When you press this button,
use the tip of a pointed object such as a pencil or
toothpick.
Note that the memory contents, however, will be
erased by preesing this button.
Reset button
ENGLISH
16
Advertisement
Table of Contents
