Press BAND to selects
(FM3) snd AM.
Press snd hold A.ME for more thsn 1.5
The six stronaest available stations will be
stored in memory onthepresetstation buttons
1 to 6 in order of their signal strength. The
"A MEM indication appears while the unit is
in this mode.
Use this function to automatically preset up to 6
stations each for F1, F2, F3 and AM (up to a total
of 24 stations).
When auto memoty is completed, the preset
stations are automatically scanned in order.
To stop auto memory, press A.ME again.
TOcnec~lhe preset stations (preset scan)
+If you wish to check the preset stations, press
A.ME for less than 1.5 seconds. The preset
stations stored in memory will be tuned in for 5
seconds each in order.
To stop this function, press A.ME again or press
any of the preset station buttons 1 to 6,
Press BAND to select the band from
among F1 (FM1), F2 (FM2), F3 (FM3)
Tune in the station that you wish to
preset with TUNE Y or TUNE A.
Prees one of the presat station buttons
1 to 6 for approximately
The number of the pressed preset station
next to the frequency
Repeat these procedures to preset up to 6 stations
each for FI, F2, F3 and AM.
You can manually preset stations that have not
been selected by auto memory.
If you try to preset a station on a preset station
button on which another
station of the same
band has already been preset, the previously
preset station will be erased.
During presetting of stations, beeps are heard
regardless of the beep on/off setting (page 15).