My Information Switch - Aiwa CDC-X155 Operating Instructions Manual

1
2
1
2
Press BAND to select a desired band
from smong F1 (FM1), F2 (FM2), F3
(FM3) and AM,
Prese the dasired I)reset station button,
The number of the-pressed preset station
button appears next to the frequency
indication.
Active tuning receptioncorflroi(ATRC)
This unit automatically suppresses FM noise
caused by varying signal strength resulting from
movement of the car.
The built-in automatic blending circuit mixes the
left and right channel signals according to the
strength of the reception. At the same time, the
high-cut circuit activates to maintain the sound
quality.
If the reception becomes even weaker, the unit
automatically switches to Monaural mode to
reduce noise.
MY INFORMATION
SWITCH
You can timer-activate the radio for up to two
daily radio programs. The unit turns on and off in
Radio mode at the preset time automatically.
3
1
2
3
12
With the unit turned off, press MUTE for
more than 1.5 seconde.
The "PROGRAM 1" indication flashes in the
display window.
The numbsr for which no program
is presetflashes.
Press either of preeet station button 1
or 2 to select PROGRAM 1 or 2.
( -1
The numberon which a programis
presetstops flsshing.
Press
SEL.
The "ON TIME indication flashes.
Press SEL again.
Timer indication flashes.
ENGLISH
8