Advertisement

Quick Links

TABLE OF CONTENTS
DCR-205-8; DCR-205-8-DC; DCR-205-12-DC; DCR-205-15; DCR-205-20
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to
determine whether it sustained damage during transport. If damage is discovered, record a
complete description of it on the bill of lading. If the product is undamaged, discard the
packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and
maintenance comply with laws, regulations, codes, and mandatory standards applied where
the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts,
labels, and accessories, call our Technical Service and Parts Department at (260) 665-7586. The
department can also be contacted online at https://www.vestil.com/page-parts-request.php.
Electronic copies of Instruction Manuals
Additional
copies
https://www.vestil.com/page-manuals.php.
Signal
Words..............................................................................................................
Safety
Instructions.......................................................................................................
Specifications.............................................................................................................
National
Standards.....................................................................................................
FIG. 1: DCR-205-08-DC Exploded View & Bill of
FIG. 2: DCR-205-08 Exploded View & Bill of
FIG. 3: DCR-205-12-DC Exploded View & Bill of
FIG. 4: DCR-205-15 Exploded View & Bill of
FIG. 5: DCR-205-20 Exploded View & Bill of
Using the Carrier: Manual
Using the Carrier: Powered
Record of Satisfactory
Inspections and
Maintenance.....................................................................................
Labeling
Diagram.......................................................................................................
Limited
Warranty.........................................................................................................
TABLE OF CONTENTS
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
www.vestilmfg.com
FORK-MOUNTED DRUM HANDLERS
of
this
instruction
Table of Contents
Materials........................................................
Materials.......................................................
Materials......................................................
Models.................................................................................
Models...............................................................................
Condition.................................................................................
Copyright 2021 Vestil Manufacturing
REV. 11/12/2021
V
M
ESTIL
ANUFACTURING
Fax: (260) 665-1339
manual
may
Materials..................................................
Materials..................................................
DCR-205 MANUAL
C
ORP
e-mail:
info@vestil.com
be
downloaded
.
from
Page
2
2
3
3
4
5
6
7
8
9
10
10
11
-
12
12
13
Page 1 of 13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DCR-205-8 and is the answer not in the manual?

Questions and answers

Summary of Contents for Vestil DCR-205-8

  • Page 1 For answers to questions not addressed in these instructions and to order replacement parts, labels, and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can also be contacted online at https://www.vestil.com/page-parts-request.php. Electronic copies of Instruction Manuals...
  • Page 2: Signal Words

    SAFETY INSTRUCTIONS Vestil strives to identify all hazards associated with the use of our products. However, material handling is dangerous and no manual can address every risk. The most effective way to avoid injury is for the end- user to exercise sound judgment whenever using this product.
  • Page 3: Specifications

    Standard. Apply all relevant parts of Part II: For the User. If instructions provided in this manual conflict with the Standard, then you should apply the instructions in the Standard. Vestil requests that you immediately report conflicts to its TECHNICAL SERVICE department.
  • Page 4 TABLE OF CONTENTS REV. 11/12/2021 DCR-205 MANUAL FIG. 1: DCR-205-8-DC EXPLODED VIEW AND BILL OF MATERIALS (09-006-112-001) Item Part No. Description Qty. Item Part No. Description Qty. HHCS #2 Z Plated, WELDMENT, FRAME 09-514-164 11207 GRADE A, Ø1/2 - 13 x 1...
  • Page 5 TABLE OF CONTENTS REV. 11/12/2021 DCR-205 MANUAL FIG. 2: DCR-205-8 EXPLODED VIEW AND BILL OF MATERIALS Item Part no. Description Qty. Item Part no. Description Qty. Item Part no. Description Qty. DCR-205-I-1 Bushing, rubber DCR-205-I-19 Large gear DCR-205-I-37 Shaft DCR-205-I-2 Lever...
  • Page 6 GEARBOX,SHAFT & KEY 11001 ZINC PLATED, 1/4"-20 X STOCK 1/2" BRACKET, WELDMENT, CARRIAGE STRAP AND 09-516-080 09-154-023 MOTOR MOUNT BUNG WRENCH KIT FLAT WASHER, USS, PLAIN 33011 FINISH, Ø1/2" TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Page 6 of 13...
  • Page 7 DCR-205-I-15 Hoop DCR-205-I-33 Spring pin DCR-205-I-51 Bushing DCR-205-I-16 Binder, chain DCR-205-I-34 Pin DCR-205-I-52 Ring DCR-205-I-17 Hex bolt DCR-205-I-35 Big chain wheel DCR-205-I-53 Door DCR-205-I-18 Pin DCR-205-I-36 Roller chain TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Page 7 of 13...
  • Page 8 33006 PLATED,USS, Ø5/16" SPLIT SHAFT COLLAR, LOW STRAP AND BUNG 34308 CARBON STEEL, BLACK 09-154-023 WRENCH KIT OXIDE FINISH, Ø3/4" MACHINED BUSHING, LOW 33426 CARBON STEEL, PLAIN FINISH, Ø3/4" TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Page 8 of 13...
  • Page 9 Step 3: Open the drum cradle. DCR-205-8 and DCR-205-15: Lift the latch so that the latch tooth unseats from the latch gripper. Push the clamp handle down to unclamp the drum chain. Remove the chain from the clamp. Open the 2 hinged segments of the cradle.
  • Page 10 TABLE OF CONTENTS REV. 11/12/2021 DCR-205 MANUAL USING THE CARRIER: POWERED ROTATORS (DCR-205-8-DC & DCR-205-12-DC) Step 1: Adjust the separation between fork truck tines to Modular Handheld Clamp align with the fork pockets of the drum carrier. Tines should power unit...
  • Page 11: Inspections & Maintenance

    Inspection procedures are included in the most current revision of ANSI/ITSDF B56.1. As stated in NATIONAL STANDARDS section on p. 3, Vestil recommends that you acquire a copy of the most recent revision of this standard. Apply all use and maintenance/care instructions in the standard. Vestil also recommends that you contact your local occupational health and safety authority to determine if any state or local laws, regulations, codes, ordinances, etc.
  • Page 12: Labeling Diagram

    A “modification” is a change that alters the drum carrier from satisfactory condition, like bending the structural members or removing a part or several parts. NEVER modify the unit without the express, written approval of Vestil. Modifications might make the device unsafe to use and automatically void LIMITED WARRANTY.
  • Page 13 Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid. Definition of “original part”? An original part is a part used to make the product as shipped to the Warrantee.

This manual is also suitable for:

Dcr-205-8-dcDcr-205-12-dcDcr-205-15Dcr-205-20

Table of Contents