FLIR ONE Series User Manual page 22

7 Operation
7.15 Torch
7.15.1 General
FLIR MSX is a patented technology that makes use of the visible camera in the FLIR ONE
to maximize detail and image sharpness. This feature requires some visible light, so in
dark environments turn on your phone's flashlight to enhance the image details. This fea-
ture makes use of the light that is built into the phone.
7.15.2 Use the torch
Follow this procedure:
1. To turn on the flashlight of the phone, tap the Torch icon in the top bar.
2. To turn off the flashlight of the phone, tap the Torch icon once again.
7.16 Self-timer
7.16.1 General
The Self-timer option allows the user to set a time delay before an image is saved.
7.16.2 Use the self-timer
Follow this procedure:
1. To enable the time delay option, tap the Self-timer icon in the top bar.
2. Tap again to select the desired time delay.
3. To save an image, tap the white button in the bottom bar. A timer displays the count-
down on the screen.
4. To turn off the time delay option, tap the Self-timer icon once again.
7.17 Automatic calibration
7.17.1 General
The FLIR ONE camera has a mechanical shutter inside that periodically activates and al-
lows the thermal camera to do a calibration or image refresh. When the shutter activates,
the image will freeze for a brief period. When the camera first turns on, and periodically
thereafter, the FLIR ONE app will perform an automatic calibration to provide an optimal
image. It is also possible to manually activate the shutter by tapping the Calibration icon in
the top bar.
To turn off automatic calibration and switch to manual calibration, go to Settings in the
Control Panel.
7.18 Settings
The Settings menu allows the user to configure additional features on the FLIR ONE cam-
era, as described below. These configurations are stored under FLIR ONE in the settings
of the phone.
To open the Settings, tap the Control Panel icon and then tap Settings.
7.18.1 Location
If a mobile phone signal is available, the geographic location will be saved and added to
captured images. This makes it possible to see images on a map.
16
#T810375; r. AA/51295/51327; en-US