Setup Menu; Sounds; Power Frequency; Power Save/Date And Time - Minolta MN200NV User Manual

3. Using Your Camcorder

3.3 Setup Menu

Basic settings can be changed in the Setup menu. These include date &
time, language and sound options. Power the camera on and press the
MODE button to switch to setup mode. A menu will display on the screen.

3.3.1 Sounds

This function can set the sound volume on your camcorder.
1. In Setup Mode, use the UP or DOWN buttons to select 'Sounds' and
press the OK button to enter the 'Sounds' submenu.
2. Press the UP or DOWN buttons to switch between 'Shutter', 'Beep' and
'Volume'. Press the LEFT or RIGHT buttons to change the setting of the
'Shutter' option (the sound made when a photo is captured), the 'Beep'
option (the sound is made when the camcorder mode is cycled) and the
'Volume' option (the volume level of the camera sounds).
3. Once you are happy with the sound settings press the OK button confirm
your setting and exit the submenu.

3.3.2 Power Frequency

This function sets the frequency of the camcorder from 50Hz to 60Hz.
Please check the frequency of your location and set accordingly.
1. In Setup Mode use the UP or DOWN buttons to select 'Power
Frequency' and press the OK button to enter the 'Power Frequency'
submenu.
2. Press the UP or DOWN buttons to select your desired frequency. Then
press the OK button to confirm your selection (50Hz, 60Hz). The default
frequency for the United States is 60Hz.
3.3.3 Power Save
This function sets the duration of time in which the camcorder will wait with
no user input before automatically powering off.
1. In Setup Mode use the UP or DOWN buttons to select 'Power Save' and
press the OK button to enter the 'Power Save' submenu.
2. Press the UP or DOWN buttons to navigate the menu and then press the
OK button to confirm your selected setting (Off, 1 Minute, 3 Minutes, 5
Minutes).
3.3.4 Date and Time
This function allows you to set the current Date and Time on your recorded
video clips and captured photos.