Oceanic HT10BJ User Manual page 26

Place the heater against its wall mount bracket:
A: Position the radiator so that its lower holes align with the
hooks on the mounting bracket.
B: Push the heater down until the hooks fit into the holes.
C: Position the radiator so that its upper holes align with the
hooks on the mounting bracket.
D: Pull the unit down.
INSTALLATION IN THE BATHROOM
Warning: this product shall be used in volume 2 and
out of volume only according to the national wiring
rules (For France NF C 15-100)
Note: The drawing is for reference only .
We suggest that you contact a professional
electrician for assistance.
Slide the metal latch
into the hole.
Tighten the screw to
lock the radiator on
the bracket.
Page 26 of 38