HydroPoint WeatherTRAK ET Pro3 Series Bidding Specifications page 7

• In applications where Central communication phase integrity is low, two accessory kits of
Central antenna amplifier and pole-mounted antennas can be ordered. The communication
type being used will determine if an additional enclosure and other non-supplied requirements
(mast antenna, footing support etc.) are required.
• For applications where station count above 24 stations is required an additional 24-station
input/output board and corresponding stations keys can also be ordered as separate items.
3.0 WeatherTRAK ET Pro3 Programming
3.1 Central Internet Management Capabilities
For Central communication, access to
available through a secure login and password. Each user can be assigned their own individual log-in
and password including specific access to a single or multiple controllers in an account. Access to
controllers is determined on a user by user basis and can be revised by HydroPoint Customer Service
toll-free or via an email request at support@hydropoint.com. WeatherTRAK Central provides all of
the benefits of a dedicated centrally based irrigation system without dedicated computer hardware or
software. Access to a single controller or multiple controllers can be obtained wherever access to the
internet can be obtained. Other features include:
A dashboard overview of any "Major Issues" for any controller within an account from the
•
Home page
Improved usability with fast and simple page navigation through the use of quick links, key
•
words, mouse roll-up and right click functions or header links within the web software
Contextual page HELP pop-ups to for key controller functions such as alerts. This includes:
•
Severity of an alert
o
Definition of an alert
o
Possible cause of an alert
o
Possible remedies of an alert
o
Controller behavior for each individual alert
o
How to clear the alert once the field or programming issue is resolved.
o
Current controller status overview single, multiple or all controllers in rain pause for a single or
•
multiple days, including setting different day lengths for one or more controllers.
Change a controllers name up to 50 characters in length
•
Preview of each controller's programming information based on last received ET including the
•
ability to assign stations to another program or % Adjust a single or multiple stations on the
same page.
Remote controller setup and programming for a single or multiple controllers within an account
•
from a single page. Make a single programming change to one or more stations with three
mouse clicks.
Remote controller setup or programming includes but is not limited to the following:
•
All controller setup functions except for time of day, day of the month and year.
o
Program assignment with a start time, water window and water day mode including any
o
exclusion day (for auto mode only).
Flow sensor setup including:
o
Flow sensor size
•
Flow sensor K and Offset values
•
Excluded stations from no flow monitoring
•
Station level alert exclusion – High Flow, Low Flow, No Flow
•
Multi-vendor flow sensor and master valve database
•
Selection of one or more flow monitoring functions GPM threshold values or delay
•
periods (including "Off") for
•
•
•
Controller Bidding Specifications
www.weathertrak.net
Mainline Break
Station High Flow
No Flow
7
WeatherTRAK Central functionality is