Advertisement
Orion AutoTracker
Congratulations on your purchase of a quality Orion product.
These sturdy aluminum tripods provide solid support for your
AutoTracker mount and are designed for either indoor or out-
door use.
Providing Exceptional Consumer Optical Products Since 1975
insTrucTiOn MAnuAl
#8976
Tripod
™
To get the most from your new tripod, please take a few min-
utes to read these instructions.
Refer to the labeled figure for the names of specific parts of
the tripod.
OrionTelescopes.com
Customer Support (800) 676-1343
E-mail: support@telescope.com
Corporate Offices (831) 763-7000
89 Hangar Way, Watsonville, CA 95076
IN 490 Rev. A 05/13
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ORION TELESCOPES & BINOCULARS AutoTracker 8976
Summary of Contents for ORION TELESCOPES & BINOCULARS AutoTracker 8976
- Page 1 insTrucTiOn MAnuAl Orion AutoTracker Tripod ™ #8976 Congratulations on your purchase of a quality Orion product. To get the most from your new tripod, please take a few min- utes to read these instructions. These sturdy aluminum tripods provide solid support for your AutoTracker mount and are designed for either indoor or out- Refer to the labeled figure for the names of specific parts of door use.
- Page 2 knob, and then extend the leg. When it has been extended to the desired length, tighten the lever knob back down. Elevator lock knob Before mounting the AutoTracker mount on the tripod it is a good idea to press down gently on the base plate to make sure Base plate the legs are locked securely and will not give way under the instrument’s weight.
Need help?
Do you have a question about the AutoTracker 8976 and is the answer not in the manual?
Questions and answers