Table of Contents
Advertisement
8.11 Chart Detail
The chart detail setting determines the amount of
detail shown in the Chart application.
Selecting the Low option for the Chart Detail
disables the following objects:
• Community Layer
• Chart Text
• Chart Boundaries
• Light Sectors
• Routing Systems
• Caution Areas
• Marine Features
• Land Features
• Panoramic Photo
• Roads
• Additional Wrecks
• Color Seabed Areas
• Depth Contours
Changing the level of chart detail
You can change the level of detail, displayed in the
Chart application.
In Motion mode:
1. Press the OK button.
The Chart application menu is displayed.
2. Select Chart Settings.
3. Select Chart Detail.
Selecting Chart Detail switched the detail
between High and Low.
76
8.12 High resolution bathymetry
The High Res Bathy setting is available when using
Jeppesen charts and switches the display to view
high resolution bathymetry data.
Note: With High Res Bathy switched on the
cartography is not suitable for navigation.
Off
Switching High Res Bathy on and off
If supported by your cartography type, the chart can
be switched to display high resolution bathymetry
data.
From the Chart application menu:
1. Select Chart Settings.
2. Select High Res Bathy: so that On is selected to
display high resolution bathymetry data, or
3. Select High Res Bathy: so that Off is selected to
turn off high resolution bathymetry data.
On
Dragonfly 6 / Dragonfly 7
Advertisement
Table of Contents
Troubleshooting
