Chart Settings Menu - Cartography Compatibility; Chart Selection - Raymarine Dragonfly 6 Installation And Operation Instructions Manual

8.9 Chart settings menu — cartography
compatibility
The options available in the Chart settings menu
are dependent on the cartography in use. If the
cartography in use is not compatible then the menu
option will not be shown.
Menu option

Chart Selection

Chart Detail
High Res Bathy
Chart Orientation
Text/Symbol Size
Boat Position
Community Edits
Sonar Logs
COG Vector
Deep Water From
Chart application
Compatible cartography
• LightHouse Charts
• Navionics Charts
®
• Jeppesen
®
• LightHouse Charts
• Navionics Charts
®
• Jeppesen
®
• Jeppesen
®
• LightHouse Charts
• Navionics Charts
®
• Jeppesen
®
• Jeppesen
®
• Navionics Charts
®
• LightHouse Charts
• Navionics Charts
®
• Jeppesen
®
• Navionics Charts
®
• LightHouse Charts
• Navionics Charts
®
• Jeppesen
®
• LightHouse Charts
• Navionics Charts
®
• Jeppesen
®

8.10 Chart selection

You can select the cartography type to be used in
the Chart application. The Chart selection applies
to the active Chart instance. You must have the
necessary cartography chart cards inserted into your
multifunction display in order to display different
cartography type.
Selecting the Cartography type
You can select the cartography type you want to
display in the Chart application.
Ensure you have inserted the chart card that
contains the cartography type you want to display.
From the Chart application menu:
1. Select Chart Settings.
2. Select Chart Selection.
A list of available cartography is displayed.
3. Select the cartography type you want to display
The Chart window is re-drawn to show the select
cartography type.
75