Advertisement
Quick Links
IMPORTANT INSTRUCTIONS -
Models: 9848M1, 9856M1
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
electric shock and injury to person, including the following:
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK AND INJURY TO PERSON, OBSERVE THE FOLLOWING:
1. Read all instructions before installing or using fan.
2. Use this unit only in the manner intended by the manufacturer.
If you have questions, contact the manufacturer.
3. Before servicing or cleaning the unit, switch power off at
service panel and lock the service disconnecting means to
prevent power from being switched on accidentally. When
the service disconnecting means cannot be locked, securely
fasten a prominent warning device, such as a tag, to the
service panel.
4. Installation work and electrical wiring must be done by
qualified person(s) in accordance with all applicable codes
and standards, including fire-related construction.
CAUTION:
THIS FAN MUST NOT BE USED IN POTENTIALLY
DANGEROUS LOCATIONS SUCH AS FLAMMABLE, EXPLOSIVE,
CHEMICAL-LADEN OR WET ATMOSPHERES.
5. Make certain that the power source conforms to the electrical
requirements of the fan.
984856M1 Rev. A 9-06
OPERATING MANUAL
GENERAL SAFETY INFORMATION
When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
SAVE THESE INSTRUCTIONS
6. The fan must be hung with at least 10 feet of clearance from
the floor to the blades.
7. Completely reassemble fan according to instructions before
reconnecting to power supply.
WARNING:
DO NOT BEND THE BLADE BRACKETS OR BLADES WHEN
INSTALLING THE BLADES, BALANCING THE BLADES, OR
CLEANING THE FAN. DO NOT INSERT FOREIGN OBLECTS IN
BETWEEN THE ROTATING FAN BLADES.
8. This fan is not for use in wet or damp locations.
9. Do not use fan outdoors and never locate the fan where it
may fall into a bathtub or other water container.
10. This unit must be grounded.
11. To avoid motor bearing damage and noisy and/or unbalanced
impellers, keep drywall spray, construction dust, etc. off
power unit.
WARNING:
SHOCK, DO NOT USE THIS FAN WITH ANY SOLID-STATE SPEED
CONTROL DEVICE.
www.airkinglimited.com
Ceiling Fan
TO REDUCE THE RISK OF PERSONAL INJURY,
TO REDUCE THE RISK OF FIRE, ELECTRIC
1 of 4
Advertisement
Related Manuals for Air King Builder's Choice 9848M1
Summary of Contents for Air King Builder's Choice 9848M1
-
Page 1: Important Instructions
SAVE THESE INSTRUCTIONS 984856M1 Rev. A 9-06 6. The fan must be hung with at least 10 feet of clearance from the floor to the blades. 7. Completely reassemble fan according to instructions before reconnecting to power supply. -
Page 2: Installation Instructions
4" octagon box, 3" octagon box, 1/2" deep ceiling pan, or a plaster ring with 3-1/2" mounting hole centers mounted on one of the above listed boxes. This fan will also install on a “Wiremold” No. 5738 fixture box. The electrical box must be securely anchored and capable of withstanding a load of at least 35 pounds. -
Page 3: Troubleshooting Guide
3. Repeat steps 1 and 2 for the 2 remaining blades. SECTION 10 Operation 1. Restore electrical power to the wall switch by turning the 2. Check the operation of the fan by turning on the wall switch. Electrical Box SECTION 11 Maintenance and Cleaning CAUTION: SERVICE PANEL BEFORE SERVICING THE UNIT. -
Page 4: Limited Warranty
In order to make a claim on this warranty, you must be the original consumer of the product. You will be required to present to Air King the original bill of sale showing: date of purchase, place of purchase and model purchased.