Table of Contents
Advertisement
General handling information
Transport of external
devices
Transport of internal devices
3064361_201710
11. Delivery / handling
Units are supplied fully assembled and fully wired.
Only transport units in their installation position.
Never tilt the unit when transporting it through doorways or in narrow stairwells
(lifts).
Failure to observe these instructions can damage internal components
irreparably.
When lifting the CRL-A external units with the aid of eyebolts, use lifting ropes
that provide a minimum eyebolt distance L. Keep ropes at the same length.
max. 60°
The CRL internal devices in the sizes 3500/ 4800/ 6200/ 9000 can be dismantled
into three parts to make them easier to carry in. (narrow stairwells, lifts, etc.)
The unit sections are connected with hexagon bolts at unit connectors with
captive nuts. Electric lines and control cables can be disconnected and connected
again quite simply by means of plug-in connections in the control unit casing.
Unit connectors
L
Control unit cover
19
Advertisement
Table of Contents
