CipherLab 9400 Series User Manual page 99

enableAddons
[in][out] A value that defines whether to enable UPC/EAN/JAN Addon 2 and
Addon 5.
0* Ignore Addons
1 Decode only with Addons
2 Decode with Addons (= Auto-discriminate)
addonsRedundancy
[in][out] A value that defines the decode redundancy when "Decode with
Addons (= Auto-discriminate)" is applied.
2~30 10* (times of supplementary decoding)
transmitUpcACheckDigit
[in][out] A value that defines whether to include the check digit in the UPC-A
data being transmitted.
0 Do not transmit
1* Transmit
transmitUpcECheckDigit
[in][out] A value that defines whether to include the check digit in the UPC-E0
data being transmitted.
0 Do not transmit
1* Transmit
transmitUpcE1CheckDigit
[in][out] A value that defines whether to include the check digit in the UPC-E1
data being transmitted.
0 Do not transmit
1* Transmit
preambleUpcA
[in][out] A value that defines whether to verify UPC-A preamble.
0 No preamble
1* Transmit System Number
2 Transmit System Number & Country Code
preambleUpcE
[in][out] A value that defines whether to verify UPC-E0 preamble.
0 No preamble
1* Transmit System Number
2 Transmit System Number & Country Code
preambleUpcE1
[in][out] A value that defines whether to verify UPC-E1 preamble.
0 No preamble
1* Transmit System Number
2 Transmit System Number & Country Code
Chapter 2 Reader API
91