CipherLab 9400 Series User Manual page 97

Data Matrix
Maxicode
QR Code
Channel Interpretation). All data characters 92DEC are
doubled.
2 Scan engine is set for Basic Channel operation (no
escape character transmission protocol). Data characters
92DEC are not doubled.
When decoders are set to this mode, unbuffered
Macro symbols and symbols requiring the decoder to
convey ECI escape sequences cannot be transmitted.
3 The barcode contains a GS1-128 symbol, and the first
codeword is 903-907, 912, 914, 915.
4 The barcode contains a GS1-128 symbol, and the first
codeword is in the range 908-909.
5 The barcode contains a GS1-128 symbol, and the first
codeword is in the range 910-911.
A PDF417 barcode, ABCD, with no transmission protocol enabled, is
transmitted as ]L2ABCD.
0 ECC 000-140, not supported.
1 ECC 200.
2 ECC 200, FNC1 in first or fifth position.
3 ECC 200, FNC1 in second or sixth position.
4 ECC 200, ECI protocol implemented.
5 ECC 200, FNC1 in first or fifth position, ECI protocol
implemented.
6 ECC 200, FNC1 in second or sixth position, ECI protocol
implemented.
0 Mode 4 or 5
1 Mode 2 or 3
2 Mode 4 or 5, ECI protocol implemented.
3 Mode 2 or 3, ECI protocol implemented in secondary
message.
0 Model 1
1 Model 2, ECI protocol not implemented.
2 Model 2, ECI protocol implemented.
3 Model 2, ECI protocol not implemented, FNC1 implied in
first position.
4
Model 2, ECI protocol implemented, FNC1 implied in first
position.
5 Model 2, ECI protocol not implemented, FNC1 implied in
second position.
6
Model 2, ECI protocol implemented, FNC1 implied in
second position
Chapter 2 Reader API
89