Notes For The Set Up - Horizon Fitness H-1000 User Manual

6. Notes for the set-up
Note: The pictures below are only for reference.
Stack should be placed like this
position. Stand on the plastic feet.
H-1000 Fuel Cell Stack User Manual V4.4
The tube is required to be less than 20cm between stack
output and purging valve. The tube connected to the purging
valve output is required to be less than 30cm. The inner
diameter of the tube is required to be more than 2mm.
Warning: The tube between the hydrogen pressure regulator
and the fuel cell gas input is required to be less than 30cm.
The pressure of the hydrogen is
between 0.45--0.55Bar.
The voltage of external power supply is
between 12V - 14V, the current range is
different based on the different stack.
The load connecter, load+, is connected to
the "load +"in the controller. Connected the
load- to "FC- & Load-" in the stack.
20