Download Print this page

Helipal STORM Binding Procedure

Racing drone w/naza gps controler
Hide thumbs Also See for STORM:

Advertisement

Quick Links

Storm Racing Drone
(w/NAZA GPS CONTROLER)
Binding Procedure
For RadioLink AT-9 Radio controller
V1.3
Copyright@2015 HeliPal.com. All Rights Reserved
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the STORM and is the answer not in the manual?

Questions and answers

Summary of Contents for Helipal STORM

  • Page 1 Storm Racing Drone (w/NAZA GPS CONTROLER) Binding Procedure For RadioLink AT-9 Radio controller V1.3 Copyright@2015 HeliPal.com. All Rights Reserved...
  • Page 2 Use the small screwdrivers to press and hold the switch inside the receiver until it is flashing with light in Blue and Purple, Switch on the radio controller, it will start searching for available receiver. Receiver will stop flashing while the bind process complete and the radio controller will the signal strength on the screen Copyright@2015 HeliPal.com. All Rights Reserved...
  • Page 3 Go to [AUX-CH] -> ATTITUDE, apply the setting below: [CH8] = VrB [CH9] = SwA [CH10] = SwB [CH] = CH7 [SW3] = SwG [SW2] = NULL [GPS] = 0% [ATTI.] = 50% [ATTI.] = 100% Copyright@2015 HeliPal.com. All Rights Reserved...
  • Page 4 [1][RESET] [1] = SwH (Using Switch H to responsible for the reset timer action) [1][RESET] [2] = DOWN (Using Switch H’s down action 10) [F/S][THRO] = 0% to reset the timer) [F/S][AUX2] = +28% Copyright@2015 HeliPal.com. All Rights Reserved...
  • Page 5 How to Control Copyright@2015 HeliPal.com. All Rights Reserved...