Advertisement
8. Blow-out function
On the front is a hose intake for the blow-out function. Place
the hose on the connection and turn it clockwise.
9. Tapping Function for Cleaning the HEPA Filter
Use the telescopic bar to remove the dust in the HEPA filter via
tapping. The fixture can be found on the top, next to the han-
dle. If there is a power loss, we recommend tapping 3 – 5
times.
10. Inserting the Vacuum Cleaner Bag
Open the clear cover and insert the vacuum cleaner bag.
11. Exchanging or Emptying the Vacuum Cleaner Bag
Open the clear cover and exchange or empty out the vacuum
cleaner bag.
12. Taking the Top off
Release the quick coupling on each side and lift the top up.
13. Replacing the HEPA Filter
After removing the top, as described in step 12, the HEPA fil-
ters can easily be placed or exchanged.
14. Cleaning the HEPA Filter
Remove the filter from vacuum cleaner and clean it under a
water stream.
Let the filter dry and place it back again.
15. Cleaning the Equipment and the Connections
Remove the equipment needing to be cleaned and clean it
thoroughly under running water. Then, mount the it back to-
gether or store it in the designated intakes.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Artikel 00000
Seite 7
11
2020-1
Advertisement
