Table of Contents
Advertisement
Static balance
10.
Both elevators must be 100% static balanced in reference to the hinge
line.
11.
For instructions refer to CONTROL SURFACE BALANCE.
Operational check
12.
Move the controls in the cockpit throughout the full range of deflection.
Check for:
•
Correct deflections of control surfaces.
•
Interference of controls, linkages, surfaces with other components.
•
Excessive friction.
ELEVATOR TRIM TAB
13.
The elevator trim tab is operated by servo.
Deflections
14.
Measure deflection on top of trim tab at push-rod attach.
•
Up:
•
Down: 25
Surface clearance
•
The minimum gap between trim tab and elevator is 0.060" all the
way.
Indicator position
16.
Verify neutral position of trim position indicator at neutral trim tab.
30
(Tolerance is +3.0 / -3.0)
(Tolerance is +3.0 / -3.0)
09B-03
11/19/02
Advertisement
Table of Contents
