Lutron Electronics LOS-CDT Series Manual page 5

Sensors
Wiring
Relay Model Option
LOS-CDT-500R-WH, LOS-CDT-1000R-WH, and LOS-CDT-2000R-WH only
Gray wire logic with photo cell active:
Room First Occupied
Light level
Below set value
Above set value
*May require power pack
Choose wire based on functionality):
•
Yellow/White: NO (normally open)
Open: Unoccupied
Closed: Occupied
•
Black/White: NC (normally closed)
Open: Occupied
Closed: Unoccupied
Cap off unused wire.
S p e c i f i c at i o n S u b m i t ta l
®
Job Name:
Job Number:
Lighting
Control
system*
Lights
Turn on
Remain off
Model Numbers:
LOS-CDT Series
Red (+20 – 24 V-)
Gray (control: occupancy and photo cell signal)
Blue: Cap off
Black (common)
During Occupancy
Light level Lights
Falls below set value Turn on
Moves above set value Remain on
Yellow/White (NO)
Black/White (NC)
Blue/White (Relay, Common)
Occupancy Sensors
369653c 5 02.07.13
page
5