Power Supply Options - Lutron Electronics LOS-CDT Series Manual

Sensors
Wiring: System Control
Power packs may be required when interfaced to LutronR lighting control systems. If more than 1 occupancy
sensor is connected to the same input, a power pack is required. A maximum of 3 occupancy sensors can be
connected to the same input. If more than 3 sensors are required per input, use one of the following models:
LOS-CDT-500R-WH, LOS-CDT-1000R-WH, or LOS-CDT-2000R-WH.

Power Supply Options

LutronR Lighting Control System
Digital microWATTT
EcoSystemR
Energi Savr NodeT
GRAFIK 5000T/6000R/7000T
GRAFIK EyeR 3000/4000
GRAFIK EyeR QS
HomeWorksR
HomeWorksR QS
LCP128T
microWATTR
QuantumR
RadioRAR
RadioRAR 2
Softswitch128R
* Some system components do not supply external power for occupancy sensors. Refer to individual product
specifications for more information.
S p e c i f i c at i o n S u b m i t ta l
®
Job Name:
Job Number:
LOS-CDT Series
Power Pack Required?
No
No
No*
No, when used with seeTouchR wallstations with occupancy sensor
connections.
Yes
No*
Yes
No*
No, when used with seeTouchR wallstations with occupancy sensor
connections.
No
No*
Yes
Yes
No, when used with seeTouchR wallstations with occupancy sensor
connections.
Model Numbers:
Occupancy Sensors
369653c 3 02.07.13
page
3