Table of Contents
Advertisement
Product user manual
AIMA-FPAS
6.2.2 Module operating voltage and temperature alarm
Click on the corresponding module, as shown in the following figure, to view the module alarm information. By clicking
on 'FPAS', under 'Modules' tab, the operator can view the module temperature and power supply voltage alarms. The
operator can utilise the status indicators to judge whether the module is working properly.
The status has three conditions:
Normal: Green
Major alarm: Red
Use the status indicators to determine if the module is working properly. If the device is replaced or reset, click on
'Refresh' to update the alarm information.
2018-08/EN V2
Technetix Group Limited
18
Advertisement
Table of Contents
