Table of Contents
Advertisement
Glass ceramic with standard glass
7
Trouble-shooting
You may be able to trouble-shoot the following errors yourself. If not, note down the error
message in full (message and E numbers) and then call Customer Services or report it
to us online.
7.1
Error messages
Display
illuminates
A continuous acoustic
signal is emitted,
flashes and the appli-
ance switches off
flashes
flashes
or
and a num-
ber illuminate
▸ Only use the cleaning agents and methods for glass ceramic
that we recommend.
Possible cause
▪ The childproof lock is activ-
ated.
▪ A button or a slider was
touched for longer than
10 seconds.
▪ Object (e.g. pan, dish) on the
control panel.
▪ Food boiled over on to the
control panel.
▪ The excess temperature pro-
tection of a cooking zone
was triggered.
▪ An interruption in the power
supply.
▪ Internal error occurred.
7 Trouble-shooting
Solution
▸ See how to operate appli-
ance with childproof lock
activated (see page 12).
▸ Switch the childproof lock
off.
▸ Remove object or food
that has boiled over.
▸ The appliance can be
used again as normal.
▸ Allow the cooking zone to
cool down.
▸ Continue cooking on a dif-
ferent cooking zone.
▸ Check cookware.
▸ Touch any button to ac-
knowledge the display.
▸ The appliance can be
used again as normal.
▸ Note down the error num-
ber.
▸ Note down the serial num-
ber (SN) of the appliance.
See the identification plate
for this.
▸ Call Customer Services.
17
Advertisement
Table of Contents
