Emerson FB1100 Replacement Manual page 7

FB1100/FB1200 Flow Computer Termination Board Field Replacement Guide
Front End Cap
3. Unscrew the end cap turning it counter-clockwise until the cover comes off. Set it aside in
a safe location.
Note
If you need more leverage place a long screwdriver or other appropriate tool across the
two notches in the cover to act as a pry bar.
Front End Cap (unscrewed)
Important
When replacing the rear end cap, ensure wires connecting to the terminal plate do not
get crimped or caught between the end cap threads and the enclosure.
4. Disconnect power at terminal TB1 on the termination board.
5. Disconnect all terminal blocks and disconnect all wires (I/O, grounding, communications)
coming into the flow computer.
6. With a #2 Phillips-head screwdriver loosen the two captive fastening screws on the battery
pack enclosure.
Rear End Caps
Rear End Cap (unscrewed)
D301820X012
November 2020
5